Global Sites
Home> News> Technical Data
News
/Group News
/Industry News
/Technical Data
/Special Report
/Video
/Exhibition
/Publications

Project & Case

Project & Case

Contact Us

contact us
  • Address: Guangjian Building, No.12 – Wangcheng Road, Luoyang, China
  • Zip Code:
  • Email:
  • Phone:
  • Fax:

Technical Data

What to pay attention to when installing and maintaining the furnace door system of a glass tempering furnace?

Source: LandGlass  Attention: 406  Published: 2023-05-24

The furnace door system consists of a cylinder, a drive shaft, tension springs, pull rods, and a furnace door. When the tempering furnace door system is in operation, the cylinder moves and drives the drive shaft to rotate. The drive shaft drives the pull rod up and down through the shifter fork. The pull rod then flips the furnace door to achieve the door opening and closing.

When performing furnace door maintenance and installation, note that the distance between the upper furnace door frame and the upper surface of the ceramic roller conveyor shall be no less than 30mm, and the distance between the lower furnace door frame and the upper surface of the ceramic roller conveyor shall be no less than 10mm. Ensure that the cylinder-driven furnace door can be opened smoothly with no jerking. Ensure that when closing the tempering furnace door, the upper furnace door frame does not interfere with the roller and can be completely closed with the lower furnace door frame.